">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 17 Next »

Cartridges Involved

This Configuration element involves the following Cartridges.

Note: Not all cartridges are available for all CMC models.

Interior Backup Definition

  • The Interior Backup controls where the blade plunges into the fallout on interior cuts.

  • The Interior cuts into the fallout, not the matboard.

  • The Interior Backup field is marked with a Black Arrow.

Select the Bevel Type for the Interior Backup to be Edited:

Interior Backup on Openings

Problem:

  • The Interior Backup on Openings is cutting too long/too short.

Resolution:

  • Normal Bevel

  • Reverse Bevel

  • Normal Bevel-Front of Mat

  • Reverse Bevel-Front of Mat

Interior Backup on Drops  

Problem:

  • The Interior Backup for Drops is cutting too long/too short.

Resolution:

  • Normal Drop

  • Reverse Drop

  • Normal Drop-Front of Mat

  • Reverse Drop-Front of Mat

Interior Backup on the Outside

Problem:

  • The Interior Backup for the Outside is cutting too long/too short.

Resolution:

  • Outside

  • Outside-Front of Mat

Interior Backup on V-Grooves 

Problem:

  • The Interior Backup for V-Grooves is cut too long/too short.

Resolution:

  • V-Grooves

  • No labels