">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 13 Next »

Cartridges Involved

This Configuration element involves the following Cartridges.

Note: Not all cartridges are available for all CMC models.

Tool Configs Section

The Tool Configs on the Configurations Screen displays the global settings for the bevel cartridge tabs. 

Horizontal 

Problem:

  • The opening/object is cut in the wrong place Horizontally.

Resolution:

  • Adjust the Horizontal Home.

Select this topic to see information on the Horizontal Home which defines the global horizontal placement of objects cut with the blade cartridges. 

For the Horizontal Home for non-blade cartridges, see Horizontal Adjustment.

Vertical 

Problem:

  • The opening/object is cut in the wrong place Vertically.

Resolution:

  • Adjust the Vertical Home.

Select this topic to see information on the Vertical Home which defines the global vertical placement of objects cut with the blade cartridges. 

For the Vertical Home for non-blade cartridges, see Vertical Adjustment.

Depth Bias 

Problem:

  • The opening/object is cut at the wrong depth when a SKU has been selected.

Resolution:

  • Adjust the Depth Bias.

Select this topic to see information on the Depth Bias which is used to calculate the proper blade depth when a SKU has been selected.

Plunge Count 

Problem:

  • The opening/object does not pause for a blade change while cutting.

Resolution:

  • Adjust the Plunge Count.

Select this topic to see information on the Plunge Count, which is the number of plunges for this particular blade cartridge before pausing for a blade change.

Circle/Oval Rotation Button

Problem:

  • The Circle/Oval cuts with a Feather/Bump.

Resolution:

  • Use the Circle/Oval Rotation Utility to correct for Feathers/Bumps.

Select this topic to see information on the Circle/Oval Rotation Utility to adjust the oval rotation for different size ovals.

  • No labels