You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 17 Next »
The 45 Degree Cartridge cuts a 45° bevel into the matboard.
Use the Configurations screen to adjust how the 45 Degree Cartridge is being cut.
With the desired design on the Cut Preview screen, click the Configurations button to open the Configurations screen.
Select the 45 Degree Cartridge tab to edit the Configurations for the 45 Degree Cartridge.
Select the Bevel Type from the Current Bevel Type dropdown control.
See Editing the 45 Degree Configurations for full instructions on adjusting the Configurations for the 45° Cartridge.
