Deboss Wide Configurations

Cartridges Involved

This Configuration element involves the following Cartridges.

Note: Not all cartridges are available for all CMC models.

Deboss Wide Configurations
The Blue Deboss Wide Cartridge presses a wide stylus into the matboard to create a subtle design.

Select the Deboss Tab on the Configurations screen.

Select the Wide-Blue cartridge from the Cartridge dropdown control.

Be sure to select the Deboss Wide from the Current Bevel Type dropdown control.

Deboss-Wide is Applied to the Wrong Place Horizontally
This is viewed from the front of the mat. Select this topic to adjust the Horizontal Adjustment.

Deboss-Wide is Applied to the Wrong Place Vertically
This is viewed from the front of the mat. Select this topic to adjust the Vertical Adjustment.

Deboss-Wide is the Wrong Size
This is viewed from the front of the mat. Select this topic to adjust the Opening Adjustment.

Deboss-Wide Applied at the Wrong Depth
Select this topic to adjust the Depth Setting.

Deboss-Wide Cartridge Tears the Mat
Select this topic to adjust the Corner Pause.

Deboss-Wide Lines are too Long
This is viewed from the front of the mat. Select this topic to adjust the Overshoot.

Deboss-Wide Lines are too Short
This is viewed from the front of the mat. Select this topic to adjust the Overshoot.

Deboss-Wide Set to Plunge Between Segments
Select this topic to adjust the Plunge between segments.

Troubleshooting Button
Use the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.