Not Cutting the Outside | |
|---|---|
Select Off from the Outside Cut Options dropdown control to not cut the outside of the mat on the CMC Z1 and Z (9000z). | |
Select Off from the Outside Cut Options dropdown control. The outside of the mat will not be cut. Optionally, select one of the other Outside Cut Options to cut the outside of the mat. | |
See Also: Cut the Outside Toggle | |
|---|---|
Optionally, click the Cut the Outside Toggle to Off. The outside of the mat will not be cut. Select On to cut the outside of the mat. | |
Advanced Outside Options | |
|---|---|
The same Outside Cut Options are available on the Advanced Outside Options screen from the Cut Mode dropdown control. Click the Set Advanced Options button on the Cut Preview screen. | |
On the Advanced Outside Options screen, set Cut Mode to Off. The Cut Mode matches the selections from the Outside Cut Options as described above. Click OK. Optionally, select one of the other Cut Mode options to cut the outside of the mat. | |
The outside of the mat will not be cut. | |
Defaults: Set the Default for Cutting the Outside | |
|---|---|
The default setting for Cutting the Outside can be set in the Admin > Editor section. | |
Defaults: Set the Default for the Advanced Options | |
|---|---|
The default setting for the Advanced Options can be set in the Admin > Cutting section. | |
Defaults: Set the Default for the Cut Mode | |
|---|---|
The default setting for the Cut Mode can be set in the Admin > Cutting section. | |