">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Cartridges Involved

This Configuration element involves the following Cartridges.

Note: Not all cartridges are available for all CMC models.

Interior Backup

The Interior Backup is where the blade backs up before initially plunging into the fallout of the opening, such as when cutting a French Stair. 

Interior Cuts cut into the fallout of the opening, not the matboard. 

Select the Bevel Type for the Interior Backup to be Edited:

Interior Backup on Openings

This is viewed from the front of the mat. Select this topic to see information on editing the Interior Backup on Openings.

  • Normal Bevel

  • Reverse Bevel

  • Normal Bevel-Front of Mat

  • Reverse Bevel-Front of Mat

Interior Backup on Drops  

This is viewed from the front of the mat. Select this topic to see information on editing the Interior Backup on Drops.

  • Normal Drop

  • Reverse Drop

  • Normal Drop-Front of Mat

  • Reverse Drop-Front of Mat

Interior Backup on the Outside

This is viewed from the front of the mat. Select this topic to see information on editing the Interior Backup on the Outside.

  • Outside

  • Outside-Front of Mat

Interior Backup on V-Grooves 

This is viewed from the front of the mat. Select this topic to see information on editing the Interior Backup on V-Grooves.

  • V-Grooves

  • No labels