">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

Cartridges Involved

This Configuration element effects the following Cartridges.

Note: Not all cartridges are available for all CMC models.

Tool Configs

The Tool Configs on the Configurations Screen displays the global settings for the bevel cartridge tabs. 

Horizontal 

Select this topic to see information on the Horizontal Home which defines the global horizontal placement of objects cut with the blade cartridges. 

For the Horizontal Home for non-blade cartridges, see Horizontal Adjustment.

Vertical 

Select this topic to see information on the Vertical Home which defines the global vertical placement of objects cut with the blade cartridges. 

For the Vertical Home for non-blade cartridges, see Vertical Adjustment.

Depth Bias 

Select this topic to see information on the Depth Bias which is used to calculate the proper blade depth when a SKU has been selected.

Plunge Count 

Select this topic to see information on the Plunge Count, which is the number of plunges for this particular blade cartridge before pausing for a blade change.

Circle/Oval Rotation Button

Select this topic to see information on the Circle/Oval Rotation Utility to adjust the oval rotation for different size ovals.

  • No labels