This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 2 Next »

View from Front/Back* Toggle

Toggle the View from Front/Back button to view from the front or back of the design.

*This is not the same as reversing the entire design. For information on reversing the design, see Flip Design. 

Viewing from the Front

Click the View from Front toggle (View from Front toggle is On). 

The project will be viewed from the front of the design.

Viewing from the Back

Click the View from Back toggle (View from Front toggle is Off). 

The project will be viewed from the back of the design.

  • No labels