This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Current »

Borders Toggle

Use the Borders toggle to allow object edges and center points to snap to the Border Lines.

Borders Toggle allows object edges and center points to snap to the Border Lines. 

Borders Toggle On allows object edges and center points to snap to the border lines. The Borders Toggle appears bright when toggled on. 

Borders Toggle Off allows object edges and center points to be placed without snapping them to border lines. 

Borders and Dynamic Outsides Toggle

If using Dynamic Outsides, the Borders Properties indicates whether the Borders are added to the top layer or the bottom layer when creating the new outside dimension. 

Here the openings are positioning from the bottom layer.

Here the openings are positioning from the top layer.

Using the Borders

Borders Toggle allows object edges and center points of objects to snap to the Border lines. 

Click and drag the desired objects to the borders. 

The object edges and centers will snap to the green border lines which makes alignment easy.

Set the Default for Borders

The default setting for the Borders can be set in the Admin > Editor section.

See Also: Border Properties for editing the Border widths.

  • No labels