This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Current »

Display Current Layer Only

Use the Display Current Layer Only toggle to display the current layer only, which may be helpful when working on a complicated design on the CMC Z1, Z (9000z), 9000, and 8000.

NOTE: You may have to set the Cut Preview Screen to full screen to view this toggle.

Display Current Layer Only On

Click the Display Current Layer Only toggle On to display only the current layer on the Cut Preview Screen.

Click the Display Current Layer Only toggle to On.

Only the current layer is displayed, suppressing the other layers. 

NOTE: You may have to set the Cut Preview Screen to full screen to view this toggle. 

Display Current Layer Only Off

Click the Display Current Layer Only toggle to Off to display all layers of the current design on the Cut Preview Screen.

Click the Display Current Layer Only toggle to Off.

All layers of the design are displayed. 

NOTE: You may have to set the Cut Preview Screen to full screen to view this toggle.

  • No labels