Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Changing the Blade in the Blade Cartridge

Loosen the Cartridge Release knob.

Pull out the Blade Cartridge.

Remove the Cover from the Blade Cartridge.

Replace the blade, making sure that the blade aligns to the first notch.

Replace the cover to the Blade Cartridge, allowing the magnet to snap onto the Blade.

Insert the Blade Cartridge keeping the protruding Blade Depth Adjustment Thumbwheel on the right side.

Tighten the Cartridge Release knob to lock it in place.

  • No labels