">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 34 Next »

  • The 45°+ Cartridge cuts the bevel angle on the thicker matboard at 45°.

  • This bevel angle is displayed on the Front or the Back of the mat depending upon the selected Bevel Type.

    • The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

    • The Bevel Type determines the initial blade plunge position.

  • The Black 45°+ Blade Cartridge is labeled with a 45° Angle Symbol and Plus Symbol on the Cartridge end.

  • The 45°+ Blade Cartridge is not selected within the Editor; it is set by using a Blade Depth above 16 on the Cut Preview.

  • Older systems may have a 45°+ Yellow Plastic Blade Cartridge. 

Contents:

45PlusMetalBevelOpening70800.pngEnd45PlusCartridge70800.png
  • No labels