">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 74 Next »

Interior Backup on V-Grooves

Contents:

  • If the Interior Backup on the Inside Cut of the V-Groove is cut Too Long, Decrease the Interior Backup.

  • If the Interior Backup on the Inside Cut of the V-Groove is cut Too Short, Increase the Interior Backup.

🛠️ Click the Minus [-] or Plus [+] button in the desired field several times, perform a test cut, and continue adjusting until satisfied.

  • The V-Groove Interior Backup adjusts the Blade’s Plunge (Backup) into the Fallout (Interior).

    • If the V-Groove Interior Backup cuts Too Long, Decrease the Interior Backup.

    • If the V-Groove Interior Backup cuts Too Short, Increase the Interior Backup

Full Definition: Interior Backup on V-Groove Definition

  • No labels