">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 94 Next »

Oval Rotation on Oval V-Grooves

Because this is an Oval V-Groove, you will be using either the Outside Oval Rotation or the /wiki/spaces/FrameShop8x/pages/1942502544, based on which V-Groove oval line you are editing.

  • If the Outside cut of the Oval V-Groove has a Feather, Increase the Outside Oval Rotation.

  • If the Outside cut of the Oval V-Groove cuts with a Bump, Decrease the Outside Oval Rotation.

  • If the Inside cut of the Oval V-Groove has a Feather, Decrease the Inside Oval Rotation.

  • If the Inside cut of the Oval V-Groove cuts with a Bump, Increase the Inside Oval Rotation.

Contents:

 How to Select the Bevel Type to Edit

Select desired /wiki/spaces/FrameShop8x/pages/1942492338. 

Select the desired Bevel Type from /wiki/spaces/FrameShop8x/pages/1942498835.

Edit the desired Configuration field.

 How to Adjust the Oval Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

  • No labels