">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 88 Next »

Exterior Backup on Drops

Contents:

  • The Exterior Backup controls where the Blade Plunges into the Matboard (not the Fallout) on the Exterior Cuts of objects. 

  • The Exterior Cut is where the Blade Plunges/Retracts from the Matboard (not the Fallout).

    • If the Exterior Backup is leaving a Hook in the corner, Increase the Exterior Backup.

    • If the Exterior Backup is cut Too Long, Decrease the Exterior Backup.

    • If the Exterior Backup is cut Too Short, Increase the Exterior Backup.

BackupOvercutEBArrows70800.png

 How to Adjust the Exterior Backup

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

  • No labels