">

Click here to check out our new How To section">Click here to check out our new How To section

Skip to end of banner Go to start of banner

V-Groove Outside Cut has a Feather

Skip to end of metadata

Created by dani.simmonds, last modified on Oct 14, 2024

Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

V-Groove Outside Cut has a Feather

If the Outside cut of the Oval V-Groove has a Feather, Increase the Outside Oval Rotation.

A Feather in an Oval Opening is a Fringe of material left behind where the cut started and ended on the Oval.
- If the Oval has a Feather, Decrease the Oval Rotation.

For Additional Information:
Circle/Oval Rotation Utility: Configurations Screen
Troubleshooting Utility for the Configurations

How to Adjust the Oval Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

No labels