">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 39 Next »

  • A Swoop in the inside or outside cut of the V-Groove is where the corners Curve Inward toward the opening.

 V-Groove Swoop General Definition

A Swoop in a V-Groove is where the corners Curve Inward toward the opening on either the Outside or Inside Cut of the V-Groove.

If the Outside cut of the V-Groove has a Swoop, Decrease the Outside Rotation.

If the Inside cut of the V-Groove has a Swoop, Increase the Inside Rotation.

The Rotation on V-Grooves controls for Swoops or Flares on V-Grooves.

See: Rotation on V-Grooves Configurations

 Outside V-Groove Swoop Definition

A Swoop in the outside cut of the V-Groove is where the corners Curve Inward toward the opening on the Outside Cut of the V-Groove.

If the Outside cut of the V-Groove has a Swoop, Decrease the Outside Rotation.

The Outside Rotation for V-Grooves controls for Swoops or Flares on V-Grooves.

See: Outside Rotation for V-Grooves Configurations

 Inside V-Groove Swoop Definition

A Swoop on the inside cut of the V-Groove is where the corners Curve Inward toward the opening on the inside cut of the V-Groove.

If the Inside cut of the V-Groove has a Swoop, Increase the Inside Rotation.

The Inside Rotation for V-Grooves controls for Swoops or Flares on V-Grooves.

See: Inside Rotation for V-Grooves Configurations

 How to Adjust the Configurations

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

  • No labels