You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 40 Next »
A Swoop in the inside or outside cut of the V-Groove is where the corners Curve Inward toward the opening.
If the Outside cut of the V-Groove has a Swoop, Decrease the Outside Rotation.
If the Inside cut of the V-Groove has a Swoop, Increase the Inside Rotation.
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.
Click OK and do another test cut.
Continue making adjustments until the desired outcome is achieved.
