">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 37 Next »

  • The V-Groove Exterior Backup controls where the Blade Plunges into the Matboard (not the Fallout) on the Exterior Cuts of the Outside Cut of the V-Groove.

  • The Exterior Cut is where the Blade Plunges/Retracts from the Matboard (not the Fallout).    

    • If the Exterior Backup on the Outside Cut of the V-Groove is cut Too Long, Decrease the Exterior Backup.

    • If the Exterior Backup on the Outside Cut of the V-Groove is cut Too Short, Increase the Exterior Backup.

 V-Groove Exterior Backup Full Definition

The V-Groove Exterior Backup controls where the Blade Plunges into the Matboard (not the Fallout) on the Exterior cuts of the Outside Cut of the V-Groove. The initial plunge position is determined by the bevel type.

The Exterior Cut is where the Blade Plunges or Retracts from the Matboard (not the Fallout).  

If the Exterior Backup on the Outside Cut of the V-Groove is cut Too Long, Decrease the Exterior Backup.

If the Exterior Backup on the Outside Cut of the V-Groove is cut Too Short, Increase the Exterior Backup.

The V-Groove Exterior Backup field is marked with a Green Arrow on the Configurations screen and the Map illustration.

See: V-Groove Exterior Backup Configurations

 How to Adjust the Configurations

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

  • No labels