You are viewing an old version of this page. View the current version.
Compare with Current View Page History
Version 1 Next »
If the Inside cut of the V-Groove has a Flare, Decrease the Inside Rotation.
For Additional Information: See Troubleshooting Utility for information on adjusting for a Swoop or Flare in a Non-Oval V-Groove.
A Flare on the Inside cut of the V-Groove is where the corners Curve Away from the V-Groove.
The Rotation on V-Grooves controls for Swoops or Flares on V-Grooves.
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.
Click OK and do another test cut.
Continue making adjustments until the desired outcome is achieved.
