You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 58 Next »
If the Non-Blade Tool line is applied Too Far Up Vertically, Decrease the Vertical Adjustment.
If the Non-Blade Tool line is applied Too Far Down Vertically, Increase the Vertical Adjustment.
For Additional Information:
See Vertical Home which defines the global Vertical placement of objects cut with the Blade Cartridges.
See Vertical Home on the Troubleshooting Utility to adjust the bladed cartridges.
Select desired Cartridge Tab.
Select the desired Bevel Type from Current Bevel Type.
Edit the desired Configuration field.
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.
Click OK and do another test cut.
Continue making adjustments until the desired outcome is achieved.
