">

Click here to check out our new How To section">Click here to check out our new How To section

Skip to end of banner Go to start of banner

Cut Speed Percentage

Skip to end of metadata

Created by dani.simmonds on Aug 15, 2024

Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Cut Speed Percentage

Enter the desired Cut Speed Percentage for each Cartridge type.
- 100% is cutting at Full Speed.
- 50% is cutting at Half Speed.
When that particular Cartridge is used next, it will use the new Cut Speed entered.
Slowing down the cut speed can help when cutting intricate designs to help prevent the Head from skipping on tight corners.

For Additional Information:
See Variable Pressure Optimization (VPO) for more information.
See Adjusting the Air Pressure for Typical Matboard for more information.
See Adjusting the Air Pressure for Dense Matboard for more information.
See Adjusting the Air Pressure for Extra Dense Matboard with the 90° Cartridge for more information.

Cartridge Definition

A Cartridge is the physical component that holds the Blade, Deboss Stylus, Pen or other application tool.

This example shows that the 90 Degree Cartridge will cut at 50% speed.

No labels