The Other Cartridge Adjustments section contains additional configuration fields for V-Grooves and for the non-blade cartridges.

Width Adjustment (V-Groove)

Select this topic to see information on editing the V-Groove if it is cutting too wide or too narrow.

Outside Rotation (V-Groove) 

Select this topic to see information on editing for a Swoop or Flare on the Outside cut of a Non-Oval V-Groove.

Inside Rotation (V-Groove) 

Select this topic to see information on editing for a Swoop or Flare on the Inside cut of a Non-Oval V-Groove.

Outside Oval Rotation (V-Groove)  

Select this topic to see information on editing for a Bump or Feather on the Outside cut of an Oval V-Groove.

Inside Oval Rotation (V-Groove)  

Select this topic to see information on editing for a Bump or Feather on the Inside cut of an Oval V-Groove.

Horizontal Adjustment (Tool Specific) 

Select this topic to see information on editing the Horizontal placement for Deboss, Pen or Vinyl tool.

Vertical Adjustment (Tool Specific) 

Select this topic to see information on editing the Vertical placement for Deboss, Pen or Vinyl tool.

Depth Setting (Tool Specific) 

Select this topic to see information on editing the optimum Blade Depth for the Deboss, Pen or Vinyl tools.

Corner Pause (ms) (Tool Specific)  

Select this topic to see information on editing the amount of time to Pause in the corners, in milliseconds, when applying the Deboss, Pen or Vinyl tool.

Overshoot (Tool Specific) 

Select this topic to see information on editing how much to Overshoot past the end of the segment for Deboss, Pen or Vinyl tool; similar to an overcut.

Plunge (Tool Specific) 

Select this topic to see information on editing whether to Plunge or Unplunge between segments of an object when doing a Deboss, Pen or Vinyl object.

Install Pen  

Select this topic to see information on editing with the Install Pen utility to calibrate the system for different pens.