Selecting the 90 Degree Cartridge in the Editor

Selecting the 90° Blade Cartridge
How to select the 90 Degree Cartridge from within the software. Click on the opening. Click on the Properties Tab. Click the Cartridge Icon on the desired layer. The 45° blade cartridge is the default bevel type. The 90° blade cartridge does not support blade depths above 16.
Template Object Select the 90° Bevel Cartridge. Only the blade cartridges can be used on Templates: 45°, 52° and 90° cartridge. To change the Template to a non-blade cartridge, see Changing the Template to Deboss/Pen/Vinyl in the Template Properties.
Non-Template Object Select the 90° Bevel Cartridge. If the selected object is a non-template, all of the licensed applicable cartridges will be displayed. The cartridges not available in the current scenario are either grayed out or not displayed. For instance, the Crease cartridge can only be selected for rectangular shapes.
New Cartridge Selected The current layer displays the selected cartridge.
Go to the Cut Preview Go to the Cutting Preview and select to cut the mat. Insert the 90 Degree Blade Cartridge when prompted.

Search