You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 18 Next »
The 90° plastic green blade cartridge is designed to cut 90° bevels on standard 4-ply matboard.
Select this topic to see information on Selecting the 90 Degree Blade Cartridge in the Software.
Select this topic to see information on Selecting the 90 Degree Blade Cartridge Outside Cut on the CMC Z1 and Z(9000z).
Select this topic to see information on Selecting the 90 Degree Blade Cartridge Outside Cut on the CMC 9000, 8500e SBT and 8000+.
Select this topic to see information on Air Pressure for Cutting with the 90 Degree Blade Cartridge to cut typical matboard or dense matboard material.
Select this topic to see information on Cutting an Extra Dense Layer with the 90 Degree Blade Cartridge.
Select this topic to see information on Slowing Down the 90 Degree Blade Cartridge Cut Speed on Extra Dense Material.
Select this topic to see information on Changing the Blade on the 90 Degree Cartridge.
Select this topic to see information on Changing to the 90 Degree Blade Cartridge.
Select this topic to see information on Editing the 90 Degree Blade Cartridge Configurations.
