Rotation on Crease

Select desired Cartridge Tab. 

Select the desired Bevel Type from Current Bevel Type.

Edit the desired Configuration field.

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

A Swoop in a Crease is where the corners Curve Inward toward the crease.

If the Crease has a Swoop, Increase the Rotation.

The Rotation controls for Swoops and Flares in Openings.

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

A Flare in a Crease is where the corners Curve Away from the crease.

If the Crease has a Flare, Decrease the Rotation.

The Rotation controls for Swoops and Flares in Openings.

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.