">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 29 Next »

52 Degree Cartridge Configurations

  • The 52 Degree Cartridge cuts a 52° bevel into the matboard. 

 Cartridge Definition

A Cartridge is the physical component that holds a Blade, Deboss Stylus, Pen or other application tool.

Select the 52 Degree Cartridge Bevel Type

 How to Select the Bevel Type to Edit

Select desired Cartridge Tab. 

Select the desired Bevel Type from Current Bevel Type.

Edit the desired Configuration field.

 Bevel Type Definition

The Bevel Type is the Angle that the blade cuts on the Matboard/Fallout surface when it is not cut at a 90° Right Angle.

52 Degree Opening Configurations

The 52 Degree Opening cuts a 52° bevel into the matboard opening.

52 Degree Drop Configurations

The 52 Degree Drop cuts a 52° bevel into the matboard drop.

52 Degree Outside Configurations

The 52 Degree Outside cuts a 52° bevel into the matboard outside.

52 Degree V-Groove Configurations

The 52 Degree V-Groove cuts a 52° bevel into the matboard V-Groove.

Troubleshooting Button

Select this topic to see information on the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.

 Troubleshooting Button Definition

The Troubleshooting Utility allows you to bring in a single opening and automatically selects the correct Cartridge tab and Bevel Type to configure.

  • No labels