">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 13 Next »

Convert Arcs to Splines

  • Splines can be tangified with less distortion, which will give a smoother cutting path for the design. 

  • Some people prefer to draw with the Arc tool then convert to Splines (Curve) after they have finished drawing the design.

 Arc Definition

The Arc Tool tool function allows you to draw a three-point mathematically defined curve in the Trace software.

The Arc has three points: the Initial Position and the Terminating Position (which are called "anchors") and one separate Middle point (which is called a "handle") which can be moved to change the shape of the Arc.

 Bezier/Spline/Bezier Definition

The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

The Bezier/Spline Curve is defined by four points: the Initial Position and the Terminating Position (which are called "Anchors") and two separate Middle Points (which are called "Handles"), which can be moved to alter the shape.

Converting Arcs to Splines

  • This displays a simple 3-Point Arc.

  • Click Edit > Convert Arc to Splines.

 Arc Definition

The Arc Tool tool function allows you to draw a three-point mathematically defined curve in the Trace software.

The Arc has three points: the Initial Position and the Terminating Position (which are called "anchors") and one separate Middle point (which is called a "handle") which can be moved to change the shape of the Arc.

  • The Arc has been converted to a Spline, or in other words, into a 4-Point Bezier Curve. 

 Bezier/Spline Definition

The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

The Bezier/Spline Curve is defined by four points: the Initial Position and the Terminating Position (which are called "Anchors") and two separate Middle Points (which are called "Handles"), which can be moved to alter the shape.

  • No labels