">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 25 Next »

Tool Configs Section

  • The Tool Configs on the Configurations Screen displays the global settings for the bevel cartridge tabs. 

Horizontal 

Problem:

  • Opening cuts in the wrong place Horizontally.

Resolution:

 Horizontal Home Definition

The Horizontal Home defines the global Horizontal placement of objects cut with the Blade Cartridges.

If the Opening is cut too far Left, Increase the Horizontal Home.

If the Opening is cut too far Right, Decrease the Horizontal Home.

Vertical 

Problem:

  • Opening is cut in the wrong place Vertically.

Resolution:

 Vertical Home Definition

The Vertical Home defines the global Vertical placement of objects cut with the Blade Cartridges.

If the Object is cut too far Up, Decrease the Vertical Home.

If the Object is cut too far Down, Increase the Vertical Home.

Depth Bias 

Problem:

  • Opening is cut at the Wrong Depth when a SKU has been selected.

Resolution:

  • Blade Depth is too Shallow:

 Depth Bias Definition

The Depth Bias is used to calculate the proper Blade Depth when the SKU selected for the matboard contains the Matboard Thickness.

The formula is: [(Default Depth) - 10]

For example, if the normal Blade Depth for 4-ply is 11, then 11-10=1, so enter 1 for the Depth Bias.

Plunge Count 

Problem:

  • Opening does not Pause for a Blade Change while cutting.

Resolution:

  1. Adjust the Plunge Count in the Configuration Screen.

  2. Toggle the Plunge Count to On in the Cut Preview.

  3. See Plunge Count for additional information.

 Plunge Count Definition

The Plunge Count controls the number of Blade Plunges for each Blade Cartridge before pausing for a Blade Change.

Circle/Oval Rotation Button

Problem:

  • Circle/Oval has a Feather/Bump.

Resolution:

 Feather Definition

A Feather in an Oval Opening is a Fringe of material left behind where the cut started and ended.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

If the Oval Opening cuts with a Feather, Decrease the Oval Rotation.

 Bump Definition

A Bump in an Oval Opening is a Lump of material left behind where the cut started and ended.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

If the Oval Opening cuts with a Bump, Increase the Oval Rotation.

  • No labels