Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Next »

Cutting Glass

Note: Make sure that the glass cutter wheel is lubricated with a drop of light alcohol based oil (not provided) to ensure smooth cutting operation.

  • Insert the Glass Cartridge.

  • Place glass to be cut onto the AirGlide, aligning it to the Material Stop.

  • Turn the speed toggle to SLOW.

  • DO NOT Engage the Clamp!

WARNING: Do not use the Clamp when cutting glass. You may risk injury.

  • Pull the Cut lever down to cut the glass.

  • Remove the glass.

  • Push the cut lever up to return the trolley to the top of the gantry.

  • No labels