Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

Cutting Glass

Note: Make sure that the glass cutter wheel is lubricated with a drop of light alcohol based oil (not provided) to ensure smooth cutting operation.

Insert the Glass Cartridge.

Place glass to be cut onto the AirGlide, aligning it to the Material Stop.

Turn the speed toggle to SLOW.

DO NOT Engage the Clamp!

WARNING: Do not use the Clamp when cutting glass. You may risk injury.

Pull the Cut lever down to cut the glass.

Remove the glass.

Push the cut lever up to return the trolley to the top of the gantry.

  • No labels