45 Degree Configurations: FrameShop Configurations Screen

The 45 Degree Cartridge cuts a 45° bevel into the matboard.   

Select the desired Bevel Type from the Current Bevel Type dropdown control.

Below is a list of support documentation for editing the configurations of the 45 Degree Bevel Cartridge on the 45 Degree Tab.

Select this topic to see information on editing the configurations for the 45 Degree Opening, including:

• Normal Bevel

• Reverse Bevel

• Normal Bevel-Front of Mat

• Reverse Bevel-Front of Mat

Select this topic to see information on editing the configurations for the 45 Degree Drop, including:

• Normal Drop

• Reverse Drop

• Normal Drop-Front of Mat,

• Reverse Drop-Front of Mat

Select this topic to see information on editing the configurations for the 45 Degree Outside, including:

• Outside

• Outside-Front of Mat

Select this topic to see information on editing the configurations for the 45 Degree V-Groove.

• V-Groove

Select this topic to see information on the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.