V-Groove Interior Overcut Definition |
|---|
| Panel |
|---|
| panelIconId | atlassian-plus |
|---|
| panelIcon | :plus: |
|---|
| panelIconText | :plus: |
|---|
| bgColor | #FFFAE6 |
|---|
| |
|
the Blade the Blade Retracts from the Fallout (not the Matboard) on the Interior cuts of the Inside Cut of the V-Groove. The initial plunge position is determined by the bevel type. The Interior Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard).
|
|
Interior Overcut field is marked with a White Arrow on the Configurations screen and the Map illustration.| Info |
|---|
See V-Groove Interior Overcut to adjust the Interior Overcut for 
Image Removed Backup and Overcut Illustrationinfo| Interior Overcut Full Definition |
| The V-Groove |
|
Backups and Overcuts control where the Blade Plunges/Retracts from the Matboard/Fallout on the Exterior/Interior cuts when cutting V-Grooves.Image Removed The Backups and Overcuts Fields for V-Grooves Control Specifically Where the Blade Plunges into and Retracts From the Matboard or Fallout | V-Groove Cut Direction and Cut Order |
|---|
| Info |
|---|
The Inside of the V-Groove cuts First in a Clockwise direction. These are Internal cuts, which cut into the V-Groove Fallout. The Outside of the V-Groove cuts Second in a Counter-Clockwise direction. These are External cuts, which cut into the Matboard.
|
| Image RemovedInterior Overcut controls where the Blade Retracts from the Fallout (not the Matboard) on the Interior cuts of the Inside Cut of the V-Groove. The initial plunge position is determined by the bevel type. The Interior Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard). If the Interior Overcut on the Inside Cut of the V-Groove is cut Too Long, Decrease the Interior Overcut on V-Grooves. If the Interior Overcut on the Inside Cut of the V-Groove is cut Too Short, Increase the Interior Overcut on V-Grooves. The V-Groove Interior Overcut field is marked with a White Arrow on the Configurations screen and the Map illustration.  Image Added Image AddedSee: V-Groove Interior Overcut Configurations |
| Expand |
|---|
| title | How to Adjust the Configurations |
|---|
| When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
| Image Added |