Versions Compared

Old Version 8

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 22

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

45°+ Reverse Bevel Drop Definition

Panel
panelIconIdatlassian-plus1f9d9-200d-2640-fe0f
panelIcon:pluswoman_mage:
panelIconText:plus:🧙‍♀️
bgColor#FFFAE6

  • The 45°+ Reverse Bevel Drop is created by cutting into the thicker fallout surface with the blade angled at 45°, thereby slanting the bevel under the fallout surface.

  • The matboard core is not visible from the front.

  • The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.The Bevel Type determines the initial blade plunge position.

Expand
title45°+ Reverse Bevel Drop Full Definition

    • The

45°+ Reverse Bevel

    • Drop is

created by cutting into the thicker fallout surface with the blade angled at 45°, thereby slanting the bevel under the fallout surface. The matboard core is not visible from the front. The initial plunge position is determined by the bevel type.The Drop is

    • one of the categories within certain opening styles, like the initial section cut of an Open V-Groove.

    • However, it cannot be chosen as a standalone bevel type within

Designer

    • the Design Editor.

  • The

Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut

  • Blade Depth must be above 16 in order for the CMC to prompt for the 45°+ Cartridge.

  • Select Reverse Drop or Reverse Drop-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

Image RemovedImage RemovedSee:

45PlusMetalBevelOutside70800.pngImage Added
Excerpt
hiddentrue
name45 Degree Plus Reverse Bevel Drop

...

Expand
titleHow to Adjust the Configurations

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

...

  • The 45°+ Reverse Bevel Drop is created by cutting into the thicker fallout surface with the blade angled at 45°, thereby slanting the bevel under the fallout surface.

  • The matboard core is not visible from the front.

45PlusMetalBevelOutside70800.pngImage Added

Full Definition: 45 Degree Plus Reverse Bevel Drop Definition