Versions Compared

Old Version 8

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Change to the 90 Degree Blade Cartridge

Info

  • The 90°

blade cartridge is labeled 90° on the end and is green. Image Removed

  • Cartridge cuts a 90° Right Angle into the matboard.

  • The Green 90° Blade Cartridge is labeled “90” with a 90° Angle Symbol on the Cartridge end.

End90Cartridge70800.pngImage Added

  • Push blade cartridge release down to eject the current blade cartridge.

Turn 90 degree
Image Added

  • Turn the new cartridge over and reinsert into the head with the blade facing the CMC board and the notch on the back of the cartridge facing the head

, until it clicks into place

  • .

It can only be inserted one way.Image RemovedTurn cartridge over and reinsert into the head with the blade facing the CMC board and the notch on the back of the cartridge facing the head, until it clicks

  • It should click into place.

    • It can only be inserted one way.

  • If there is side-to-side movement of the blade in the blade cartridge, or if chunks have been cut out of it, then it is time to replace the blade cartridge.

    • Image Removed

    		Image Added