Versions Compared

Old Version 8

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cut the Outside As Designed: Cut Preview Outside Cut Options

outside

  • Outside as originally designed on the CMC Z1

and

  • ,Z (9000z)

/

  • , 9000 and 8000+.

    • This can be helpful when coming from Traceor Nesting where you have already determined how you want the

outside

    • Outside to be cut.

  • If you have Remnant Trimming on, it will also cut off the scrap edge.

Image Removed

Advanced Outside Options

The same Outside Cut Options are available on the Advanced Outside Options screen from the Cut Mode dropdown control.Click the Set Advanced Options button on theCut Preview screen.Image RemovedImage Removed

  • This can be helpful when coming from Trace or Nesting where you had already selected how you want the outside(s) to be cut.  

  • If you have Remnant Trimming on, it will also cut off the scrap edge.

Image Removed

Defaults: Set the Default for Cutting the Outside 

The default setting for Cutting the Outside can be set in the Admin > Editor section.

Image Removed

Defaults: Set the Default for 90 Degree Outside Cut

The default setting for 90 Degree Outside can be set in the Admin > Cutting section.

Image Removed

Defaults: Set the Default for the Advanced Options

The default setting for the Advanced Options can be set in the Admin > Cutting section.

Image Removed

Defaults: Set the Default for the Cut Mode

The default setting for the Cut Mode can be set in the Admin > Cutting section.

Image Removed

    • Remnant Trimming feature trims off the remaining portion of the mat Horizontally or Vertically after cutting the design to make storing the leftovers easier.

Image Added

Default Settings