Troubleshooting Utility for Ovals
If the Oval Opening has a Feather, Decrease the Oval Rotation.
Use the Troubleshooting Configurations to fine-tune for Bumps/Feathers in an Oval Opening.
Circle/Oval Rotation Utility
If the Oval Opening has a Feather, Decrease the Oval Rotation.
Use the Circle/Oval Rotation Utility to fine-tune specific sizes of circles/ovals for Feathers and Bumps.
Oval Rotation on Openings | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Contents:
| |||||||||||||||
| |||||||||||||||
Select desired Cartridge Tab. Select the desired Bevel Type from Current Bevel Type. Edit the desired Configuration field. | |||||||||||||||
| Expand | ||
|---|---|---|
| ||
Cutting from the Front will cut with the face of the mat toward the operator, and can be selected on the Cutting Preview. Configurations cut from the Back will only display the bevel type name with no further label; i.e., Normal Bevel. If you are cutting an element that must be applied to the front of the mat, such as a V-Groove or Pen design, any openings on that layer will also cut from the front and use the Front of Mat configuration item; i.e., Normal Bevel - Front of Mat. So if you are having problems with a Normal Bevel cut on the same layer as a V-Groove, make sure you select Normal Bevel-Front of Mat to edit the configurations for that opening. |
| Expand | ||
|---|---|---|
| ||
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
Oval Opening has a Feather
If the Oval Opening has a Feather, Decrease the Oval Rotation.
| Expand | ||
|---|---|---|
| ||
A Feather in an Oval Opening is a Fringe of material left behind where the cut started and ended on the Oval. If the Oval Opening has a Feather, Decrease the Oval Rotation. The Oval Rotation controls for Bumps or Feathers on an Oval. |
| Expand | ||
|---|---|---|
| ||
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
Oval Opening has a Bump
| title | Bumps in Oval Opening Definition |
|---|
| Expand | ||
|---|---|---|
| ||
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
|  |