Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Oval Rotation on Openings

infotitle

Contents:

Child pages (Children Display)
alltrue
depth0
allChildrentrue
style
sortAndReverse
first0

Expand

Insert excerpt
How to

Select the Bevel Type to Edit

Select desired Cartridge Tab

Select the desired Bevel Type from Current Bevel Type.

Edit the desired Configuration field.

Expand
titleCut from Front Full Definition

Cutting from the Front will cut with the face of the mat toward the operator, and can be selected on the Cutting Preview.

Configurations cut from the Back will only display the bevel type name with no further label; i.e., Normal Bevel.

If you are cutting an element that must be applied to the front of the mat, such as a V-Groove or Pen design, any openings on that layer will also cut from the front and use the Front of Mat configuration item; i.e., Normal Bevel - Front of Mat.

So if you are having problems with a Normal Bevel cut on the same layer as a V-Groove, make sure you select Normal Bevel-Front of Mat to edit the configurations for that opening.  

Image RemovedImage Removed
Expand
titleHow to Adjust the Oval Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image Removed

Oval Opening has a Feather

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF
Expand
titleFeather in Oval Opening Definition

A Feather in an Oval Opening is a Fringe of material left behind where the cut started and ended on the Oval.

If the Oval Opening has a Feather, Decrease the Oval Rotation.

The Oval Rotation controls for Bumps or Feathers on an Oval.

Image RemovedImage Removed
Expand
titleHow to Adjust the Oval Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image RemovedImage Removed

Oval Opening has a Bump

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF
If the Oval Opening has a Bump, IncreasetheOval Rotation. Expand
titleBumps in Oval Opening Definition
A Bump in an Oval Openingis a Lumpof material left behind where the cut started and ended.If the Oval Opening has a Bump, Increasethe Oval Rotation.The Oval Rotation controls for Bumps or Featherson an Oval Opening.Image RemovedImage Removed
Expand
titleHow to Adjust the Oval Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image RemovedImage Removed

See Also: Troubleshooting Utility for Ovals

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF
  • If the Oval Opening has a Feather, Decrease the Oval Rotation.

  • If the Oval Opening has a Bump, IncreasetheOval Rotation.
  • Use the Troubleshooting Configurations to fine-tune for Bumps/Feathers in an Oval Opening.

  • Image Removed

    See Also: Circle/Oval Rotation Utility

    Panel
    panelIconIdatlassian-note
    panelIcon:note:
    bgColor#B3F5FF
  • If the Oval Opening has a Feather, Decrease the Oval Rotation.

  • If the Oval Opening has a Bump, IncreasetheOval Rotation.
  • Use the Circle/Oval Rotation Utility to fine-tune specific sizes of circles/ovals for Feathers and Bumps.

  • Image Removed

    Adjust the Configurations
    How to Adjust the Configurations
    nameHow to Adjust Configurations
    nopaneltrue


    Insert excerpt
    Feather in an Oval
    Feather in an Oval
    nameFeather in an Oval Definition
    nopaneltrue


    Insert excerpt
    Bump in an Oval
    Bump in an Oval
    nameBump Definition
    nopaneltrue

    Panel
    panelIconId1f9d9-200d-2642-fe0f
    panelIcon:man_mage:
    panelIconText🧙‍♂️
    bgColor#FFFAE6
    OvalBevelOpeningFeatherBump70800.pngImage AddedImage Added