Page Comparison

Cartridges Involved

This Configuration element involves the following Cartridges.

Info
Note: Not all cartridges are available for all CMC models.

Image Removed

Editing the Rotation on V-Grooves

Expandtitle

Outside Rotation

for V-Grooves DefinitionThe Outside Rotation

on

Non-Oval

V-Grooves

controls for Swoops and Flares in the Outside Cut of the Non-Oval V-Grooves. Expand

title	Outside Swoop Definition

A Swoopin a Non-Oval V-Groove is where the corners Curve Inward toward the opening on either the Outside or Inside Cut of the V-Groove.The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.If the Outside Non-Oval V-Groove cuts with A Flare in a Non-Oval


If V-Groove Outside has a Swoop, Decrease the Outside Rotation.

Expand

title	Outside Flare Definition

If V-Groove

is where the corners Curve Away from the opening on either the Outside or Inside Cut of the V-Groove.The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.If the Outside Non-Oval V-Groove cuts with

Outside has a Flare, Increase the Outside Rotation.

Selecting the V-Groove Rotation in

Image Removed

V-Groove Outside has a Flare

Problem:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Outside cut of the Non-Oval V-Groove has Flares.

Resolution:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Increase the Outside Rotation.

Expand

title	Outside V-Groove Cut Flare Definition

A Flare in a Non-Oval V-Groove is where the corners Curve Away from the opening on either the Outside or Inside Cut of the V-Groove.

The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.

If the Outside Non-Oval V-Groove cuts with a Flare, Increase the Outside Rotation.

Expand

title	How to Adjust the Outside Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image Removed

Problem:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Outside Non-Oval V-Groove has a Swoop or Flare.

Resolution:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Use the Troubleshooting Configurations to fine-tune for Swoop/Flare in a Non-Oval V-Groove.

Expand

title	Outside Rotation for V-Grooves Definition

The Outside Rotation on Non-Oval V-Grooves controls for Swoops and Flares in the Outside Cut of the Non-Oval V-Grooves.

Expand

title	Outside Swoop Definition

A Swoopin a Non-Oval V-Groove is where the corners Curve Inward toward the opening on either the Outside or Inside Cut of the V-Groove.The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.

If the Outside Non-Oval V-Groove cuts with a Swoop, Decrease the Outside Rotation.

Expand

title	Outside Flare Definition

A Flare in a Non-Oval V-Groove is where the corners Curve Away from the opening on either the Outside or Inside Cut of the V-Groove.

The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.

If the Outside Non-Oval V-Groove cuts with a Flare, Increase the Outside Rotation.

Image Removed

Insert excerpt

	How to Adjust the Configurations

Select the desired Cartridge Tab.
Select the V-Groove from the Current Bevel Type.
Edit the Inside Rotation or Outside Rotation field, depending on which V-Groove line you are editing.

Expand

title	How to Adjust the Outside Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image Removed

V-Groove Cutting Direction

Tip

First Cut of V-Groove:

Cuts the Interior V-Groove Line.
Cuts into Fallout, not the matboard.
Cuts Clockwise.
This uses the Inside Rotation.

Tip

Second Cut of V-Groove:

Cuts the Exterior V-Groove Line.
Cuts into Matboard, not the fallout.
Cuts Counter-Clockwise.
This uses the Outside Rotation.

V-Groove Outside has a Swoop

Problem:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Outside cut of the Non-Oval V-Groove has Swoops.

Resolution:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Decrease the Outside Rotation.

Expand

title	Outside V-Groove Cut Swoop Definition

A Swoopin a Non-Oval V-Groove is where the corners Curve Inward toward the opening on either the Outside or Inside Cut of the V-Groove.The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.

If the Outside Non-Oval V-Groove cuts with a Swoop, Decrease the Outside Rotation.

Expand

title	How to Adjust the Outside Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

How to Adjust the Configurations
name	How to Adjust Configurations
nopanel	true

Insert excerpt

	Swoop on V-Groove
	Swoop on V-Groove
name	Swoop on V-Groove Definition

Insert excerpt

	Flare on V-Groove
	Flare on V-Groove
name	Flare on V-Groove Definition

Panel

panelIconId	1f9d9-200d-2642-fe0f
panelIcon	:man_mage:
panelIconText	🧙‍♂️
bgColor	#FFFAE6

For Additional Information:
V-Groove Outside Cut has a Swoop
V-Groove Outside Cut has a Flare
Troubleshooting Utility for the Configurations

Image Added

Versions Compared

Old Version 61

New Version Current

Key

Cartridges Involved

Editing the Rotation on V-Grooves

Outside Rotation

on

V-Grooves

V-Groove Outside has a Flare

Problem:

Resolution:

See Also: Troubleshooting Utility for Non-Oval V-Grooves

Problem:

Resolution:

V-Groove Cutting Direction

V-Groove Outside has a Swoop

Problem:

Resolution: