changes.mady.by.user dani.simmonds
Saved on May 30, 2024
Saved on Jun 12, 2024
A Swoop in an Opening is where the corners Curve Inward toward the Opening.
If the Opening has a Swoop, Increase the Rotation.
A Swoop is where the corners Curve Inward toward the object.
If the object has a Swoop, Increase the Rotation.
The Rotation controls for Swoops and Flares/wiki/spaces/FrameShop8x/pages/1942511158in objects.
See: Rotation Configurations
A Swoop in an Opening is where the corners Curve Inward toward the opening.
The Rotation controls for Swoops and Flares in Openings.
A Swoop in a Drop is where the corners Curve Inward toward the drop.
If the Drop has a Swoop, Increase the Rotation.
A Swoop in a Outside is where the corners Curve Inward toward the outside.
If the Outside has a Swoop, Increase the Rotation.
The Outside Rotation controls for Swoops and Flares in the Outside Cut of the V-Grooves.
The Inside Rotation controls for Swoops and Flares on the Inside Cut of the V-Grooves.
A Swoop in the Outside cut of the V-Groove is where the corners Curve Inward toward the V-Groove.
If the Outside cut of the V-Groove has a Swoop, Decrease the Outside Rotation.
The Outside Rotation controls for Swoops and Flaresin the Outside Cutof the V-Grooves.
See: Outside Rotation Configurations
A Swoop on the Inside cut of the V-Groove is where the corners Curve Inward toward the V-Groove.
If the Inside cut of the V-Groove has a Swoop, Increase the Inside Rotation.
See: Inside Rotation Configurations
A Swoop in a Crease is where the corners Curve Inward toward the Crease.
If the Crease has a Swoop, Increase the Rotation.
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.
Click OK and do another test cut.
Continue making adjustments until the desired outcome is achieved.
...
