Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Rotation on Creases

Info
  • If the Crease has a Swoop, Increase the Rotation.

  • If the Crease has a Flare, Decrease the Rotation.

expand

Contents:

titleHow to Select the Bevel Type to Edit

Select desired Cartridge Tab

Select the desired Bevel Type from Current Bevel Type.

Edit the desired Configuration field.

Expand
titleHow to Adjust the Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image Removed

Crease has a Swoop

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF
  • If the Crease has a Swoop, Increase the Rotation.

Expand
titleSwoop in Crease Definition

A Swoop in a Crease is where the corners Curve Inward toward the crease.

If the Crease has a Swoop, Increase the Rotation.

The Rotation controls for Swoops and Flares in Openings.

Image RemovedImage Removed
Child pages (Children Display)
alltrue
depth0
allChildrentrue
style
sortAndReverse
first0

Panel
panelIconId1f9d9-200d-2642-fe0f
panelIcon:man_mage:
panelIconText🧙‍♂️
bgColor#FFFAE6
  • For Additional Information: See Troubleshooting Utility for information on adjusting for a Swoop or Flare in a Non-Oval.

Expand
titleHow to
Adjust the Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image RemovedImage Removed

Crease has a Flare

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF
  • If the Crease has a Flare, Decrease the Rotation.

Expand
titleFlare in Crease Definition

A Flare in a Crease is where the corners Curve Away from the crease.

If the Crease has a Flare, Decrease the Rotation.

The Rotation controls for Swoops and Flares in Openings.

Image RemovedImage Removed
Select the Bevel Type to Edit

Select desired Cartridge Tab

Select the desired Bevel Type from Current Bevel Type.

Edit the desired Configuration field.

Expand
titleHow to Adjust the Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image Modified
Image Removed

See Also: Troubleshooting Utility for Openings

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF
Image Removed
Image Added