...
Cartridges Involved |
|---|
This Configuration element involves the following Cartridges. | Info |
|---|
Note: Not all cartridges are available for all CMC models. |
|  Image Removed |
Editing the Rotation on Outsides |
|---|
| Expand |
|---|
|
A Swoopin a Non-Oval Opening is where the corners Curve Inward toward the opening.The Rotation controls for Swoops and Flares in Non-Oval Openings.
If the Non-Oval Opening Rotation on the Outsides |
|---|
Contents:| Child pages (Children Display) |
|---|
| all | true |
|---|
| depth | 0 |
|---|
| allChildren | true |
|---|
| style | |
|---|
| sortAndReverse | |
|---|
| first | 0 |
|---|
|
|
| Expand |
|---|
title | Flare DefinitionIf the Non-Oval Opening cuts with A Flare in aNon-OvalOpening is where the corners Curve Away from the opening.The Rotation controls for Swoops and Flares in Non-Oval Openings.
Outside has a Swoop |
|---|
Problem:
| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
|
|
Resolution:
| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
|
|
| Expand |
|---|
|
A Swoopin a Non-Oval Opening is where the corners Curve Inward toward the opening.The Rotation controls for Swoops and Flares in Non-Oval Openings.
If the Non-Oval Opening has a Swoop, Increase the Rotation.
Image Removed | Outside has a Flare |
|---|
Problem:
| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
|
|
Resolution:
| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
|
|
| Expand |
|---|
|
A Flare in aNon-OvalOpening is where the corners Curve Away from the opening.The Rotation controls for Swoops and Flares in Non-Oval Openings.
If the Non-Oval Opening cuts with a Flare, Decrease the Rotation.
Image Removed | Twisted Corner |
|---|
Problem:| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
| A Twisted Corner is when the blade turns before retracting from the matboard, which tears the matboard and twists the corner. This is especially visible from the back of the mat.
|
Resolution:| Panel |
|---|
| panelIconId | atlassian-note |
|---|
| panelIcon | :note: |
|---|
| bgColor | #B3F5FF |
|---|
| Check to make sure the Rotation hasn't been set to a high number. Twisted corners can also be a symptom of oil/water in the Air Valve, or an issue with the Head. Check the Air Regulator for excess water. Use the Clean the Foot Block procedure for cleaning the foot block.
|
| Image RemovedSelecting the Rotation in the Configurations
| Expand |
|---|
| title | When Cutting from the Front |
|---|
|
Select Current Bevel Type-Front of Mat when cutting from the front of the mat. *The different Opening Bevel Types, including whether it is cutting from the Front or Back, controls the cut direction of the Head, and determines whether the cut is a Backup or an Overcut. |
| Tip |
|---|
Adjusting the Rotation When adjusting Configurations, click the Plus/Minus on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved.
|
Image RemovedImage Removed | | Insert excerpt |
|---|
| How to Adjust the Configurations |
|---|
| How to Adjust the Configurations |
|---|
| name | How to Adjust Configurations |
|---|
| nopanel | true |
|---|
|
| Insert excerpt |
|---|
| Swoop |
|---|
| Swoop |
|---|
| name | Swoop Definition |
|---|
|
| Insert excerpt |
|---|
| Flare |
|---|
| Flare |
|---|
| name | Flare Definition |
|---|
|
| Panel |
|---|
| panelIconId | 1f9d9-200d-2642-fe0f |
|---|
| panelIcon | :man_mage: |
|---|
| panelIconText | 🧙♂️ |
|---|
| bgColor | #FFFAE6 |
|---|
| |
|  Image Added Image Added |