Cartridges Involved
This Configuration element involves the following Cartridges.
| Info |
|---|
Note: Not all cartridges are available for all CMC models. |
Exterior Backup on Drops Definition
Adjusting the Exterior Backup
| Tip |
|---|
|
| title | Exterior Backup Definition |
|---|
The Exterior Backup controls where the Blade Plunges into the Matboard (not the Fallout) on the Exterior cut.
The Exterior Backup field is marked with a Green Arrow on the Configuration screen and the Map illustration.
If the Exterior Backup is cut too Short, it can leave a Hook in the corner.
If the Exterior Backup is cut tooExterior Backup on Drops | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Contents:
| ||||||||||||||
|
Drop Exterior Backup Too Long
Problem:
The Exterior Backup is cut Too Long.
Resolution:
If the Exterior Backup is cut too Long, Decrease the Exterior Backup.
| Expand | ||
|---|---|---|
| ||
The Exterior Backup controls where the Blade Plunges into the Matboard (not the Fallout) on the Exterior cut. The Exterior Backup field is marked with a Green Arrow on the Configuration screen and the Map illustration. If the Exterior Backup is cut too Short, it can leave a Hook in the corner. If the Exterior Backup is cut too Long, Decrease the Exterior Backup. If the Exterior Backup is cut too Short, Increase the Exterior Backup. |
Drop Exterior Backup Too Short
Problem:
The Exterior Backup is cut Too Short.
Resolution:
If the Exterior Backup is cut too Short, Increase the Exterior Backup.
| Expand | ||
|---|---|---|
| ||
The Exterior Backup controls where the Blade Plunges into the Matboard (not the Fallout) on the Exterior cut. The Exterior Backup field is marked with a Green Arrow on the Configuration screen and the Map illustration. If the Exterior Backup is cut too Short, it can leave a Hook in the corner. If the Exterior Backup is cut too Long, Decrease the Exterior Backup. If the Exterior Backup is cut too Short, Increase the Exterior Backup. |
|
Current Drop Bevel Type
Select the desired Cartridge Tab.
Select the bevel type from the Current Bevel Type dropdown control.
Select Current Bevel Type-Front of Mat if it is being cut from the front of the mat.
| Info |
|---|
The different Bevel Types, including whether it is cutting from the front or the back of the mat, will determine the direction the head travels as it cuts, and dictates whether the corner is a backup or an overcut. |
| Tip |
|---|
|
|   |