|   |
| Excerpt | ||||
|---|---|---|---|---|
| ||||
|
...
The Exterior Cut is where the Blade Plunges or Retracts from the Matboard (not the Fallout).
If the Exterior Backup is cut Too Long, Decrease the Exterior Backup.
If the Exterior Backup is cut Too Short, Increase the Exterior Backup.
The Exterior Backup field is marked with a Green Arrow on the Configuration screen and the Map illustration.
...
See: Exterior Backup for Drops Configurations
...
| title | Exterior Backup on Outside Definition |
|---|
...
|
...
|
...
|
...
The V-Groove Exterior Backup controls where the Blade Plunges into the Matboard (not the Fallout) on the Exterior cuts of the Outside Cut of the V-Groove.
The Exterior Cut is where the Blade Plunges or Retracts from the Matboard (not the Fallout).
...
|
The Exterior Backup field is marked with a Green Arrow on the Configuration screen and the Map illustration.
...
See: Exterior Backup for the Outside Configurations
...
| title | Exterior Backup on V-Groove Definition |
|---|
|
...
|
...
| Expand | ||
|---|---|---|
| ||
The Backup controls where the cartridge Plunges into the Matboard. If the Backup is Too Long, Decrease the Exterior Backup. If the Backup is Too Short, Increase the Exterior Backup. The Exterior Backup field is marked with a Green Arrow on the Configuration screen and the Map illustration. |
| Expand | ||
|---|---|---|
| ||
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
...
|
The V-Groove Exterior Backup field is marked with a Green Arrow on the Configurations screen and the Map illustration.
...
See: V-Groove Exterior Backup Configurations
Full Definition: Exterior Backup Definition |