Cartridges Involved
This Configuration element involves the following Cartridges.
| Info |
|---|
Note: Not all cartridges are available for all CMC models. |
Editing the Exterior Backup on Creases
| Expand | ||
|---|---|---|
| ||
The Exterior Backup controls where the Blade Plunges into the Matboard (not the Fallout) on the Exterior cut. The Exterior Backup field is marked with a Green Arrow on the Configuration screen and the Map illustration. If the Exterior Backup is cut Too Short, it can leave a Hook in the corner. If the Exterior Backup is cut Too Long, Decrease the Exterior Backup. If the Exterior Backup is cut Too Short, Increase the Exterior Backup. |
Selecting the Crease Exterior Backup in the Configurations
Select Crease Cartridge Tab.
Select the Crease from Current Bevel Type.
Edit the Exterior Backup field.
| Expand | ||
|---|---|---|
| ||
Select Current Bevel Type-Front of Mat when cutting from the front of the mat. *The different Opening Bevel Types, including whether it is cutting from the Front or Back, controls the cut direction of the Head, and determines whether the cut is a Backup or an Overcut. |
| Tip |
|---|
Adjusting the Exterior Backup
|
Crease Exterior Backup Too Long
Problem:
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
Resolution:
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
| Expand | ||
|---|---|---|
| ||
The Exterior Backup controls where the Blade Plunges into the Matboard (not the Fallout) on the Exterior cut. The Exterior Backup field is marked with a Green Arrow on the Configuration screen and the Map illustration. If the Exterior Backup is cut Too Short, it can leave a Hook in the corner. If the Exterior Backup is cut Too Long, Decrease the Exterior Backup. If the Exterior Backup is cut Too Short, Increase the Exterior Backup. |
Crease Exterior Backup Too Short
Problem:
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
Resolution:
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
| Expand | ||
|---|---|---|
| ||
The Exterior Backup controls where the Blade Plunges into the Matboard (not the Fallout) on the Exterior cut. The Exterior Backup field is marked with a Green Arrow on the Configuration screen and the Map illustration. If the Exterior Backup is cut Too Short, it can leave a Hook in the corner. If the Exterior Backup is cut Too Long, Decrease the Exterior Backup. If the Exterior Backup is cut Too Short, Increase the Exterior Backup. |
Backup on Creases | ||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Contents:
|   | |||||||||||||||||||||||||||||||||||||||||||||