Bevel Type Examples | ||
|---|---|---|
| ||
| Expand | ||
|---|---|---|
| ||
The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. |
Outside Bevel
| Expand | ||
|---|---|---|
| ||
The Outside Bevel is created by cutting into the fallout surface with the blade angled at 45°/52°, thereby slanting the bevel under the fallout surface. The matboard core is not visible from the front. The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. Select Outside or Outside-Front of Mat from the Current Bevel Type dropdown control to edit this configuration. See: 45 Degree Outside Configurations See: 45 Degree Plus Outside Configurations See: 45 Degree Front Outside Configurations |
Closed V-Groove
| Expand | ||
|---|---|---|
| ||
The Normal Bevel Closed V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement. The matboard is sliced halfway through the thickness and the core is visible from the front. First Cut: Cuts the Interior cut into the Fallout Clockwise. Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise. Select V-Groove from the Current Bevel Type dropdown control to edit this configuration. See: 45 Degree Closed V-Groove |
 |
Normal Bevel Opening |
| Expand | ||
|---|---|---|
| ||
The Normal Bevel Opening is created by cutting into the matboard surface with the blade angled at 45°/52°, thereby slanting the bevel away from the matboard surface. The matboard core is visible from the front. The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. Select Normal Bevel or Normal Bevel-Front of Mat from the Current Bevel Type dropdown control to edit this configuration. See: 45 Degree Normal Bevel Opening Configurations See: 45 Degree Plus Normal Bevel Opening Configurations See: 45 Degree Front Normal Bevel Opening Configurations |
Reverse Bevel Opening
| Expand | ||
|---|---|---|
| ||
The Reverse Bevel Opening is created by cutting into the matboard surface with the blade angled at 45°/52°, thereby slanting the bevel under the matboard surface. The matboard core is not visible from the front. The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. Select Reverse Bevel or Reverse Bevel-Front of Mat from the Current Bevel Type dropdown control to edit this configuration. See: 45 Degree Reverse Bevel Opening Configurations See: 45 Degree Plus Reverse Bevel Opening Configurations |
Normal Bevel Drop
| Expand | ||
|---|---|---|
| ||
The Normal Bevel Drop is created by cutting into the fallout surface with the blade angled at 45°/52°, thereby slanting the bevel away from the fallout surface. The matboard core is visible from the front. The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within Designer. The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. Select Normal Drop or Normal Drop-Front of Mat from the Current Bevel Type dropdown control to edit this configuration. See: 45 Degree Normal Bevel Drop Configurations See: 45 Degree Plus Normal Bevel Drop Configurations See: 45 Degree Front Normal Bevel Drop Configurations |
Reverse Bevel Drop
| Expand | ||
|---|---|---|
| ||
The Reverse Bevel Drop is created by cutting into the fallout surface with the blade angled at 45°/52°, thereby slanting the bevel under the fallout surface. The matboard core is not visible from the front. The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within Designer. The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. Select Reverse Drop or Reverse Drop-Front of Mat from the Current Bevel Type dropdown control to edit this configuration. See: 45 Degree Reverse Bevel Drop Configurations See: 45 Degree Plus Reverse Bevel Drop Configurations |
|  | ||||||||||
Reverse Bevel Opening
|  | ||||||||||
Normal Bevel Drop
|  | ||||||||||
Reverse Bevel Drop
|  | ||||||||||
Outside Bevel
| | ||||||||||
Closed V-Groove
|  | ||||||||||
Normal Bevel Open V-Groove |
|
|
First Cut: Cuts the Interior cut into the Fallout Clockwise: Normal Bevel Drop*.
Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise: Normal Bevel Opening.
*The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within Designer.
Select Normal Drop or Normal Drop-Front of Mat from the Current Bevel Type dropdown control to edit the interior cut configuration.
Select Normal Bevel or Normal Bevel-Front of Mat from the Current Bevel Type dropdown control to edit the exterior cut configuration.
See: 45 Degree Normal Bevel Drop Configurations
See: 45 Degree Normal Bevel Opening Configurations
See: 45 Degree Plus Normal Bevel Drop Configurations
See: 45 Degree Plus Normal Bevel Opening Configurations
See: 45 Degree Front Normal Bevel Drop Configurations
See: 45 Degree Front Normal Bevel Opening Configurations
See: 52 Degree Normal Bevel Drop Configurations
See: 52 Degree Normal Bevel Opening Configurations
|  | ||||||
Reverse Bevel Open V-Groove |
|
|
First Cut: Cuts the Interior cut into the Fallout Clockwise: Reverse Bevel Drop*.
Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise: Reverse Bevel Opening.
*The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within Designer.
Select Reverse Drop or Reverse Drop-Front of Mat from the Current Bevel Type dropdown control to edit the interior cut configuration.
Select Reverse Bevel or Reverse Bevel-Front of Mat from the Current Bevel Type dropdown control to edit the exterior cut configuration.
See: 45 Degree Reverse Bevel Drop Configurations
See: 45 Degree Reverse Bevel Opening Configurations
See: 45 Degree Plus Reverse Bevel Drop Configurations
See: 45 Degree Plus Reverse Bevel Opening Configurations
See: 45 Degree Front Reverse Bevel Drop Configurations
See: 45 Degree Front Reverse Bevel Opening Configurations
See: 52 Degree Reverse Bevel Drop Configurations
See: 52 Degree Reverse Bevel Opening Configurations
|  |
Cartridge Type Examples | ||||||||
|---|---|---|---|---|---|---|---|---|
|   | |||||||