Cartridges Involved
This Configuration element involves the following Cartridges.
| Info |
|---|
Note: Not all cartridges are available for all CMC models. |
Horizontal Home for Openings Definition
| Expand | ||
|---|---|---|
| ||
The Horizontal Home defines the global Horizontal placement of objects cut with the Blade Cartridges. If the Opening is cut too far Left Horizontally, Increase the Horizontal Home. If the Opening is cut too far Right Horizontally, Decrease the Horizontal Home. |
Adjusting the Horizontal Home
| Tip |
|---|
|
Opening Cuts too Far to the Right when Not Cutting the Outside: Horizontal Border too Big
Problem:
The opening is cut too far to the Right Horizontally.
Resolution:
If the Opening is cut too far Right Horizontally, Decrease the Horizontal Home.
See Horizontal Home.
| Expand | ||
|---|---|---|
| ||
The Horizontal Home defines the global Horizontal placement of objects cut with the Blade Cartridges. If the Opening is cut too far Left Horizontally, Increase the Horizontal Home. If the Opening is cut too far Right Horizontally, Decrease the Horizontal Home. |
Opening Cuts too Far to the Left when Not Cutting the Outside: Horizontal Border too Small
Problem:
The opening cut cut too far to the Left Horizontally.
Resolution:
If the Opening is cut too far Left Horizontally, Increase the Horizontal Home.
See Horizontal Home.
| Expand | ||
|---|---|---|
| ||
The Horizontal Home defines the global Horizontal placement of objects cut with the Blade Cartridges. If the Opening is cut too far Left Horizontally, Increase the Horizontal Home. If the Opening is cut too far Right Horizontally, Decrease the Horizontal Home. |
| Info |
|---|
|
Contents:
|  |