V-Groove Cuts too Far Up Vertically (Not Cutting the Outside)
If the V-Groove is cut Too Far Up Vertically, Decrease the Vertical Home.
| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
|
| Expand | ||
|---|---|---|
| ||
The Vertical Home defines the global Vertical placement of objects cut with the Blade Cartridges. If the V-Groove is cut Too Far Up Vertically, Decrease the Vertical Home. If the V-Groove is cut Too Far Down Vertically, Increase the Vertical Home. |
| Expand | ||
|---|---|---|
| ||
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
V-Groove Cuts too Far Down Vertically (Not Cutting the Outside)
If the V-Groove is cut Too Far Down Vertically, Increase the Vertical Home.
| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
|
| Expand | ||
|---|---|---|
| ||
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
Vertical Home for V-Grooves: Configurations Screen | |||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Contents:
|
| ||||||||||||||||||||||||||||||
The Vertical Home defines the global Vertical placement of objects cut with the Blade Cartridges.
If the V-Groove is cut Too Far Up Vertically, Decrease the Vertical Home.
If the V-Groove is cut Too Far Down Vertically, Increase the Vertical Home.
|