Versions Compared

Old Version 4

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cut Front Tool: Switch Between Front and Normal Tools Options Menu: Cut Preview

Info

  • Select Switch Between Front and Normal Tools to use the standard 45° Cartridge when not cutting from the front, and the 45° Front Cartridge when cutting from the front.

Image Addedtip

Default Settings

:

  • See Admin > Cutting for the default setting for Cutting With the 45° Front Cartridge when cutting from the front of the mat.

  • See Admin > Cutting for the default setting for cutting with the Normal 45° Cartridge when cutting from the front of the mat.

    • Expand
    titleCut from Front Full Definition

    Cutting from the Front will cut with the face of the mat toward the operator, and can be selected on the Cut Preview.

    • On the Configurations screen the Current Bevel Type dropdown control will display the bevel types in this manner:

      • Cut from the Back bevel type names will be displayed with no further label; i.e., Normal Bevel.

      • Cut from the Front bevel type names will be displayed with a Front label; i.e., Normal Bevel-Front of Mat.

      • V-Grooves have their own selection on the list.

    If you are cutting an element that must be applied to the front of the mat, such as a V-Groove or Pen design, any openings on that layer will also cut from the front and use the Front of Mat configuration item; i.e., Normal Bevel-Front of Mat.

    So if you are having problems with a Normal Bevel cut on the same layer as a V-Groove, make sure you select Normal Bevel-Front of Mat to edit the configurations for that opening.  

    Image RemovedImage Removed
    Image Removed