Versions Compared

Old Version 32

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 84

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Info

Note: Not all cartridges are available for all CMC models.

Image Removed

Rotation on V-Grooves Definition

InfoThe

Outside Rotation

controls for Swoopsor Flares

on

the outside cut on non-oval

V-Grooves

. InfoThe first cut is the interior V-Groove line and cut into

  • If the Outside cut of the V-Groove

fallout and not the matboard, and is cut in a clockwise direction. This uses the Inside
The second cut is the exterior V-Groove line and cut into the matboard and not on

  • If the Outside cut of the V-Groove

fallout, and is cut in a counter-clockwise direction. This uses

See Also: Troubleshooting Utility for Non-Oval V-Grooves

Problem:

  • The Non-Oval V-Groove cuts with a Swoop/Flare.

Resolution:

Image Removed
Image Removed

V-Groove Outside has a Swoop

Problem:

  • The Outside cut of the non-oval V-Groove has Swoops.

Image Removed

Resolution:

  • Decrease the Outside Rotation.

Info

  • When making adjustments, click the plus or minus button at the end of the desired field about four times.

  • In Rotation, eight points equals one degree of rotation. Users usually make adjustments four points at a time.

  • Click OK and do another test cut.

  • Check the results of the cut and continue making adjustments until the desired outcome is achieved.

Image RemovedImage Removed

V-Groove Outside has a Flare

Problem:

  • The Outside cut of the non-oval V-Groove has Flare.

Image Removed

Resolution:

  • Increase the Outside Rotation value. 

Info

  • When making adjustments, click the plus or minus button at the end of the desired field about four times.

  • In Rotation, eight points equals one degree of rotation. Users usually make adjustments four points at a time.

  • Click OK and do another test cut.

  • Check the results of the cut and continue making adjustments until the desired outcome is achieved.

Image RemovedImage Removed

Insert excerpt
How to Adjust the Configurations
How to Adjust the Configurations
nameHow to Adjust Configurations
nopaneltrue

Insert excerpt
Swoop on V-Groove
Swoop on V-Groove
nameSwoop on V-Groove Definition
nopaneltrue

Insert excerpt
Flare on V-Groove
Flare on V-Groove
nameFlare on V-Groove Definition
nopaneltrue

Panel
panelIconId1f9d9-200d-2642-fe0f
panelIcon:man_mage:
panelIconText🧙‍♂️
bgColor#FFFAE6
Image AddedImage AddedImage Added